Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Site Sponsor Forums - In Alphabetical Order > ASL automedia

ASL automedia Specialising in the upgrade of BA/BF/Territory and FG audio and visual systems. We also repair all Ford (OEM) car stereos and produce OEM quality wiring harnesses. Website Link

Reply
 
Thread Tools Display Modes
Old 21-02-2011, 07:37 PM   #1
fgtpsi
Regular Member
 
fgtpsi's Avatar
 
Join Date: Jul 2010
Posts: 370
Default Ba prem sound with added subs

Gday guys,
Just after some advice,I have a ba xr6 with prem sound,but had a high-lo converter spliced in and running my subs,signal wire from the cigarette lighter.
It seems my system will be bassy then all of a sudden its not as bassy, but then when i turn up the bass control on the factory unit it'll kick back in?
Im on my 2nd amp and it seems to be fine for a few weeks,with no problems at all,then just start doing it again?
Any ideas?

Thanks Mark

Also could you tell me if the factory amp runs just the subs or rear speakers and sub?

__________________
FG MKII XR6T UTE
fgtpsi is offline   Reply With Quote Multi-Quote with this Post
Old 23-02-2011, 01:37 AM   #2
XB GS 351 Coupe
FF.Com.Au Hardcore
 
Join Date: Oct 2010
Location: Mid North Coast
Posts: 6,443
Default

Factory amp runs sub only.
XB GS 351 Coupe is offline   Reply With Quote Multi-Quote with this Post
Old 23-02-2011, 08:15 AM   #3
FADI75
Sponsor
 
Join Date: Jun 2005
Location: melbourne
Posts: 2,043
Default

Quote:
Originally Posted by baII4ltr
Gday guys,
Just after some advice,I have a ba xr6 with prem sound,but had a high-lo converter spliced in and running my subs,signal wire from the cigarette lighter.
It seems my system will be bassy then all of a sudden its not as bassy, but then when i turn up the bass control on the factory unit it'll kick back in?
Im on my 2nd amp and it seems to be fine for a few weeks,with no problems at all,then just start doing it again?
Any ideas?

Thanks Mark

Also could you tell me if the factory amp runs just the subs or rear speakers and sub?
hi

no too sure all depends on ur set up in the car and what equipment u using. best thing to do call us and we can assist over the phone. 0397991444 nadyea the amp only run the sub

cheers

ASL
__________________
FROM FALCON BA THROUGH FGX, TERRITORY SX THROUGH SZ - ICC UPGRADES, REPAIRS & INTEGRATION SPECIALISTS
AUTHORISED FORD REPAIR CENTRE
website: www.aslautomedia.com.au
email: info@aslautomedia.com
AUDIO INTERFACES, REVERSE CAMERAS, SATELLITE NAVIGATION & VIDEO INTEGRATION ON FACTORY COLOR SCREEN
FADI75 is offline   Reply With Quote Multi-Quote with this Post
Old 28-02-2011, 06:26 PM   #4
fgtpsi
Regular Member
 
fgtpsi's Avatar
 
Join Date: Jul 2010
Posts: 370
Default

Cheers.
Had a play with it the other day,seems when they installed my old amp the 4guage was too big for the terminals so theyve cut it down.Just stripped it back and re done it, seems to be all ok now.
__________________
FG MKII XR6T UTE
fgtpsi is offline   Reply With Quote Multi-Quote with this Post
Old 01-03-2011, 08:22 AM   #5
FADI75
Sponsor
 
Join Date: Jun 2005
Location: melbourne
Posts: 2,043
Default

Quote:
Originally Posted by baII4ltr
Cheers.
Had a play with it the other day,seems when they installed my old amp the 4guage was too big for the terminals so theyve cut it down.Just stripped it back and re done it, seems to be all ok now.
hi

good to hear.


cheers

ASL
__________________
FROM FALCON BA THROUGH FGX, TERRITORY SX THROUGH SZ - ICC UPGRADES, REPAIRS & INTEGRATION SPECIALISTS
AUTHORISED FORD REPAIR CENTRE
website: www.aslautomedia.com.au
email: info@aslautomedia.com
AUDIO INTERFACES, REVERSE CAMERAS, SATELLITE NAVIGATION & VIDEO INTEGRATION ON FACTORY COLOR SCREEN
FADI75 is offline   Reply With Quote Multi-Quote with this Post
Old 01-04-2011, 11:14 AM   #6
xr6ute
Starter Motor
 
xr6ute's Avatar
 
Join Date: Apr 2011
Posts: 9
Default Re: Ba prem sound with added subs

Quote:
Originally Posted by baII4ltr
Gday guys,
Just after some advice,I have a ba xr6 with prem sound,but had a high-lo converter spliced in and running my subs,signal wire from the cigarette lighter.
It seems my system will be bassy then all of a sudden its not as bassy, but then when i turn up the bass control on the factory unit it'll kick back in?
Im on my 2nd amp and it seems to be fine for a few weeks,with no problems at all,then just start doing it again?
Any ideas?

Thanks Mark

Also could you tell me if the factory amp runs just the subs or rear speakers and sub?


Do your speakers still work fine? i am thinking of doing the same in my ute. have considered spliceing into the speaker wiring but didnt want to loose power or quality in the speakers
xr6ute is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 02:30 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL