|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
31-03-2021, 07:04 PM
|
#1 | ||
|
Starter Motor
Join Date: Mar 2021
Posts: 1
|
Hi everyone
I'm new here, I have an au2 XR6. I have been doing it up and recently put a hi stall in it. After refitment and refilling the gearbox makes a grinding sound when I try to put it in park. It didn't do it for the first 7 litres or so, having the started the car a few times to fill the stall and lines but when I put the final 2 litres in it started. I didn't pull the box apart except for a new pan filter and gasket and the box was Bullet proof before fitting the stall. I did notice on reinstall that at some point I have tagged the front oil line causing it to kink almost completely closed. Could this be the cause of the noise or have I done something wrong when fitting the stall. This is my first go at anything to do with an auto box. Any help greatly appreciated |
||
|
|
|
07-04-2021, 06:18 PM
|
#2 | ||
|
Regular Member
Join Date: Mar 2014
Posts: 98
|
Hi Mate, this part of the forum is pretty quiet. You'd be better posting your question in the AU-BA page.
http://www.fordforums.com.au/forumdisplay.php?f=30 |
||
|
|
|
XR6 gearbox noise
Linear Mode
