|
24-01-2010, 10:57 AM | #1 | ||
Teh Baest
Join Date: Jan 2007
Location: Hills Area, NSW
Posts: 649
|
Question in title
thx knowledgeable AU brethren!
__________________
1999 Liquid Silver AU Show: XR6 Kit, Low, RDA Slotted's F&B, Fully Tabouli Sound System, Altezza Tailights (Good ones!) Go: K&N Pod w/ 3" intake, XR6T Snorkel, Pacie Comp 4480's, 2.5" Cat Back, CMS Stg2 Cam, Custom Tune, Tranny Cooler Coming..CMS Stg2A Cam, 68mm TB Later.. 4.5L w/ BOOOOOOOOOOST or XR6T or AUIII XR8 220 Currently: 151kW (165 on other dynos ) |
||
24-01-2010, 11:07 AM | #2 | |||
AU DIE HARD
Join Date: Nov 2005
Location: Between 2nd and 5th gear
Posts: 5,073
|
Are the Brembos for the AU or the wheels for the BF
Yes if the Brembos (just check the wheel weights clear & you have the right brackets ) are for the AU Not sure if the rims are for the BF
__________________
........Age and treachery will ALWAYS overcome youth and skill....... CORTINA 250 2V POWER soon to be AUXR8 Windsor pwrd .............WINDSOR WARLORD WHO CARRIES THE CLEVO MAFIA AND BROKEN BOSSES... .................................................. Quote:
|
|||
24-01-2010, 11:24 AM | #3 | ||
T3 TS50 075
Join Date: Nov 2007
Location: Perth
Posts: 1,146
|
only series 3 Azzuros clear the Brembos so if the Azzuros are from a series 2 then the answer is no
__________________
Cheers John My car T3 TS50 #75 Blueprint manual 1/4 mile 13.38 @ 102.97 mph TS 50 = 237.1 rwkw Last edited by DJM83; 24-01-2010 at 12:25 PM. |
||
24-01-2010, 06:55 PM | #4 | ||
Teh Baest
Join Date: Jan 2007
Location: Hills Area, NSW
Posts: 649
|
I have nfi what series they are from, they were on my Forte when i bought it
Is there anyway to tell?
__________________
1999 Liquid Silver AU Show: XR6 Kit, Low, RDA Slotted's F&B, Fully Tabouli Sound System, Altezza Tailights (Good ones!) Go: K&N Pod w/ 3" intake, XR6T Snorkel, Pacie Comp 4480's, 2.5" Cat Back, CMS Stg2 Cam, Custom Tune, Tranny Cooler Coming..CMS Stg2A Cam, 68mm TB Later.. 4.5L w/ BOOOOOOOOOOST or XR6T or AUIII XR8 220 Currently: 151kW (165 on other dynos ) |
||
24-01-2010, 07:12 PM | #5 | ||
The Monty
Join Date: Oct 2007
Location: Geelong
Posts: 1,226
|
i always thought rims had to be stamped with a manufactre date on the inside of one of the spokes.. but seeing as azzuros are like 20mm think, id say it might be some where else on there
|
||
25-01-2010, 12:25 AM | #6 | ||
T3 TS50 075
Join Date: Nov 2007
Location: Perth
Posts: 1,146
|
not sure how to tell the difference but the back of the spokes were machined on the T3 azzuros to clear the brembos
__________________
Cheers John My car T3 TS50 #75 Blueprint manual 1/4 mile 13.38 @ 102.97 mph TS 50 = 237.1 rwkw |
||