Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Club and Speciality Forums > Forum Community Car Clubs > AU Falcon.com.au

Reply
 
Thread Tools Display Modes
Old 18-11-2009, 10:43 PM   #1
lofty
Rusticating
 
lofty's Avatar
 
Join Date: Mar 2009
Location: Lower Lakes, SA
Posts: 541
Tech Writer: Recognition for the technical writers of AFF - Issue reason: Excellent article on AU Power window installation. 
Default New radiator = no aircon

Replaced my radiator today. Had the battery out so did the reset thing, but the AC was blowing warm air. I'm wondering if I broke something when unbolting the condenser from the rad, and let the gas out. It did waggle about a little. Are they really that fragile? Any other ideas?

__________________

Territory SYII RWD, BFII RTV tray
lofty is offline   Reply With Quote Multi-Quote with this Post
Old 18-11-2009, 10:52 PM   #2
DW260
Regular Member
 
DW260's Avatar
 
Join Date: Jan 2005
Location: Canberra
Posts: 364
Default

They put in a green dye with A/C gas, amongst other things, for that reason. Have a look to see if you can see evidence of it. You may have fractured a pipeline while removing the radiator.

Does the little orange light on the A/C switch still illuminate when you turn it on?
__________________
FPV GS Ute #370/Brembo brakes
DW260 is offline   Reply With Quote Multi-Quote with this Post
Old 18-11-2009, 11:33 PM   #3
lofty
Rusticating
 
lofty's Avatar
 
Join Date: Mar 2009
Location: Lower Lakes, SA
Posts: 541
Tech Writer: Recognition for the technical writers of AFF - Issue reason: Excellent article on AU Power window installation. 
Default

Yes, the light comes on. I had a pretty good look around the pipes near the radiator with a torch. Didn't notice any green stuff.
__________________

Territory SYII RWD, BFII RTV tray
lofty is offline   Reply With Quote Multi-Quote with this Post
Old 19-11-2009, 03:19 PM   #4
mik
FF.Com.Au Hardcore
 
mik's Avatar
 
Join Date: Feb 2005
Location: Melb north
Posts: 12,025
Default

a couple of things to check, thermo fans reconected after radiator install? is the ac pump cutting in when you hit the button? is the heater tap operating correctly? i found a vacumm line had come off on my heater tap some how, this leaves the heater in the on position from memory, if the ac is working you should notice the metal ac pipe near the gaurd getting cold.
mik is offline   Reply With Quote Multi-Quote with this Post
Old 19-11-2009, 04:43 PM   #5
SIKSIX
Its gone V
 
SIKSIX's Avatar
 
Join Date: Sep 2005
Posts: 359
Default

Well... if you let the gas out there will be nothing there for the system to condense so you will have no aircond. Trip to the air cond guys to get you system regassed I think.
SIKSIX is offline   Reply With Quote Multi-Quote with this Post
Old 19-11-2009, 06:42 PM   #6
lofty
Rusticating
 
lofty's Avatar
 
Join Date: Mar 2009
Location: Lower Lakes, SA
Posts: 541
Tech Writer: Recognition for the technical writers of AFF - Issue reason: Excellent article on AU Power window installation. 
Default

Quote:
Originally Posted by mik
a couple of things to check, thermo fans reconected after radiator install?....
Think you nailed it there Mik. I forgot to plug the fans in till after I'd started it. Like, a few seconds after. Who woulda thought that would matter? But I've done nothing to it and it's working today. Thanks a lot guys.
__________________

Territory SYII RWD, BFII RTV tray
lofty is offline   Reply With Quote Multi-Quote with this Post
Old 20-11-2009, 12:37 AM   #7
mik
FF.Com.Au Hardcore
 
mik's Avatar
 
Join Date: Feb 2005
Location: Melb north
Posts: 12,025
Default

glad to hear its goer :
mik is offline   Reply With Quote Multi-Quote with this Post
Old 21-11-2009, 12:41 AM   #8
Jastel
Donating Member
Donating Member1
 
Join Date: Dec 2006
Posts: 5,485
Technical Contributor: For members who share their technical expertise. - Issue reason: Has much experience with taxis and always jumps on here to explain things simply and help out the new guys in B-series and Contemporary... 
Default

Done this myself

Go for test drive and think, gee its hot, look at temp guage and see it climbing up

Pull over and plug in fans
Jastel is offline   Reply With Quote Multi-Quote with this Post
Old 21-11-2009, 12:57 PM   #9
private9
www.TUFFCARPARTS.com
 
private9's Avatar
 
Join Date: Feb 2006
Posts: 5,221
Default

Quote:
Originally Posted by SIKSIX
Well... if you let the gas out there will be nothing there for the system to condense so you will have no aircond. Trip to the air cond guys to get you system regassed I think.
You'd know if you accidentally cracked a line etc and let all the gas out - trust me!
private9 is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 06:09 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL