Go Back   Australian Ford Forums > Club and Speciality Forums > Forum Community Car Clubs > OzECruisers (E/N/D Series) > OzECruisers General Discussions

OzECruisers General Discussions E/N/D vehicles General Discussion ONLY. NO TECH THREADS

Reply
 
Thread Tools Display Modes
Old 26-02-2008, 08:51 PM   #1
vermiltina
Custom e-series owner
 
vermiltina's Avatar
 
Join Date: Feb 2006
Location: wodonga vic
Posts: 840
Default big power from a ea

well i haven't got any hard proof YET but i hope to see a the ea svo enhanced car in the flesh real soon thats insane with 670hp at the rear treads....its a blokes car named pat, it had a kit on it before that made 500hp but then melted the engine...it done this on pump fuel at about 20psi boost..

i was talking to him today about it, and he is just doing a BIG brake upgrade and i mean big, its getting 400mm rotors with 6 piston calipers and had to get some 19inch wheels on just to clear the brakes, which only just do the job...i hear they are simmons as well....nice...

it has a 3 inch exhaust on it at the moment, he said that they dumped the exhaust about 2 feet from the turbo where the was a flange and he gained 180hp by doing it...
so they are going to put a 4 inch system on it...
i can't wait to see it and he said that he will be taking me for a spin it as well..

another plan that he has is to put some race fuel in it bump the timing up and go for 750hp plus....
i will be taking the camera when i see it for sure...

shaun

__________________
88 ea falcon
fresh paint, 20 inch chrome wheels, ed xr front, scorcher body kit, ef/el mirrors and door trims, UPC 330mm twin piston big brakes, manual, front adjustable coil overs, 2.5 inch exhaust, twin thermos etc etc
**atomic built 660kw AU engine being fitted**
vermiltina is offline   Reply With Quote Multi-Quote with this Post
Old 26-02-2008, 10:14 PM   #2
webby_191189
low wagooon
 
Join Date: Jan 2007
Location: Swan Hill
Posts: 1,579
Default

180hp from cutting off the exhaust....someones pulling your leg there. How ever the simmons and massive brakes sound quite nice. Pics would be great
__________________
Webby
S2 AU XR6 UTE

webby_191189 is offline   Reply With Quote Multi-Quote with this Post
Old 26-02-2008, 10:30 PM   #3
vermiltina
Custom e-series owner
 
vermiltina's Avatar
 
Join Date: Feb 2006
Location: wodonga vic
Posts: 840
Default

will get some as soon as i have a look, hopefully he has a dyno sheet of it all so you guys don't think i am pulling your legs
__________________
88 ea falcon
fresh paint, 20 inch chrome wheels, ed xr front, scorcher body kit, ef/el mirrors and door trims, UPC 330mm twin piston big brakes, manual, front adjustable coil overs, 2.5 inch exhaust, twin thermos etc etc
**atomic built 660kw AU engine being fitted**
vermiltina is offline   Reply With Quote Multi-Quote with this Post
Old 26-02-2008, 10:55 PM   #4
Sorted
OzEcruisers PRESIDENT
 
Sorted's Avatar
 
Join Date: Mar 2005
Location: Melbz
Posts: 15,761
Community Builder: In recognition of those who have helped build the AFF community. - Issue reason: For all the contributions you make to the AFF community. 
Default

Wish I could an extra 180hp buy chopping my exhaust off..........:(

20psi boost is massive no wonder he cooked the engine.........

Lets see some pics, where counting on you to supply, mmmmmmm 19" simmons
__________________
1994 Ford Fairmont EF NA 6cyl Man 3.9 diff Sedan
PROEF 13.46 @ 105.78mph

Tuned by DYNOMOTIVE

200BUX - AFF Drag Nats 2019 EF Wagon
Quote:
Originally Posted by rednose View Post
Common knowledge that the more weight you take out of the car the less power you need to run the time.
Sorted is offline   Reply With Quote Multi-Quote with this Post
Old 26-02-2008, 11:54 PM   #5
Nostalgia
LOW AND SLOW
 
Nostalgia's Avatar
 
Join Date: Sep 2006
Location: Geelong.
Posts: 2,644
Default

What Do We Want "PICS", When Do We Want Them ? Nooowwww !!!
__________________
"Any Color You Like As Long As It's Black, Matt Black, With Flames, And A Bit Of Pinstriping".
Nostalgia is offline   Reply With Quote Multi-Quote with this Post
Old 27-02-2008, 12:07 AM   #6
eb91xr6
V8 Ute V8 Boat
 
eb91xr6's Avatar
 
Join Date: Aug 2005
Location: south australia
Posts: 1,804
Default

i dont want to see pics i wana see vidio of it on the roller and a screen read out of the power figer
__________________
VE SS Ute manual 09
AU XR8 UTE 200KW manual 02
Challanger Ski boat V8 01
125 Thumpster 2010
Swag
All set for the weekend
eb91xr6 is offline   Reply With Quote Multi-Quote with this Post
Old 27-02-2008, 04:51 AM   #7
vermiltina
Custom e-series owner
 
vermiltina's Avatar
 
Join Date: Feb 2006
Location: wodonga vic
Posts: 840
Default

he hasn't cooked this engine, the engine he has in it now he is running 20 psi boost through
__________________
88 ea falcon
fresh paint, 20 inch chrome wheels, ed xr front, scorcher body kit, ef/el mirrors and door trims, UPC 330mm twin piston big brakes, manual, front adjustable coil overs, 2.5 inch exhaust, twin thermos etc etc
**atomic built 660kw AU engine being fitted**
vermiltina is offline   Reply With Quote Multi-Quote with this Post
Old 04-03-2008, 10:00 PM   #8
TIKFD6
Number 5 is alive!
 
TIKFD6's Avatar
 
Join Date: Dec 2004
Location: Melbourne, Vic
Posts: 3,438
Default

Sounds like its finally getting there Shaun, How long until your turbo goes in?
I will hopefully have my Blower by the end of the year.
__________________
Kerry
Tickford wings are for Tickford cars!

"Experimental Racer" #6
1994 Gunmetal XG XR6 1997-1999
[B][COLOR=Red] 1994 Le Mans Red ED
2008 MA XR5 Mondeo

2015 VOLVO V60 T6 R-DESIGN-POLESTAR Enhanced



TIKFD6 is offline   Reply With Quote Multi-Quote with this Post
Old 04-03-2008, 10:13 PM   #9
3.9from hell
hoons cause global warmin
 
Join Date: Jun 2007
Location: SA
Posts: 776
Default

Quote:
Originally Posted by vermiltina
well i haven't got any hard proof YET but i hope to see a the ea svo enhanced car in the flesh real soon thats insane with 670hp at the rear treads.... made 500hp but then melted the engine...it done this on pump fuel at about 20psi boost..
it has a 3 inch exhaust on it at the moment, he said that they dumped the exhaust about 2 feet from the turbo where the was a flange and he gained 180hp by doing it...
so they are going to put a 4 inch system on it...
another plan that he has is to put some race fuel in it bump the timing up and go for 750hp plus....

shaun
sounds like a P plater with a VN i once knew...................
il reserve judgement and happily b proved wrong however................

bring on the proof
__________________
"if you believe you can, or believe you cant, your probably right" (henry ford)
3.9from hell is offline   Reply With Quote Multi-Quote with this Post
Old 05-03-2008, 11:22 PM   #10
gmkila
GOT 20'Z?
 
gmkila's Avatar
 
Join Date: Aug 2005
Location: WEST SUBS MELB
Posts: 278
Default

cant believe the brakes will fit inside 19 inch rims i've got 381mm 6piston brakes on my car and they will not fit with 19 inch wheels i had fr19's and had to buy 20's to fit over the brakes i'd be very interested to know who's doin a 400mm brake kit for it i'll reserve judgement till i see proof!!
__________________
one day my car will live upto its plates! out:
gmkila is offline   Reply With Quote Multi-Quote with this Post
Old 06-03-2008, 05:04 PM   #11
vermiltina
Custom e-series owner
 
vermiltina's Avatar
 
Join Date: Feb 2006
Location: wodonga vic
Posts: 840
Default

yeah yeah i know i will get the proof as soon as i can..
__________________
88 ea falcon
fresh paint, 20 inch chrome wheels, ed xr front, scorcher body kit, ef/el mirrors and door trims, UPC 330mm twin piston big brakes, manual, front adjustable coil overs, 2.5 inch exhaust, twin thermos etc etc
**atomic built 660kw AU engine being fitted**
vermiltina is offline   Reply With Quote Multi-Quote with this Post
Old 29-05-2008, 07:45 PM   #12
vermiltina
Custom e-series owner
 
vermiltina's Avatar
 
Join Date: Feb 2006
Location: wodonga vic
Posts: 840
Default

well here is it

this was with a 3 inch exhaust on

and this is with the exhaust taken off so it dumped not that far from the turbo
__________________
88 ea falcon
fresh paint, 20 inch chrome wheels, ed xr front, scorcher body kit, ef/el mirrors and door trims, UPC 330mm twin piston big brakes, manual, front adjustable coil overs, 2.5 inch exhaust, twin thermos etc etc
**atomic built 660kw AU engine being fitted**
vermiltina is offline   Reply With Quote Multi-Quote with this Post
Old 29-05-2008, 07:47 PM   #13
vermiltina
Custom e-series owner
 
vermiltina's Avatar
 
Join Date: Feb 2006
Location: wodonga vic
Posts: 840
Default

by the way this is an EA
__________________
88 ea falcon
fresh paint, 20 inch chrome wheels, ed xr front, scorcher body kit, ef/el mirrors and door trims, UPC 330mm twin piston big brakes, manual, front adjustable coil overs, 2.5 inch exhaust, twin thermos etc etc
**atomic built 660kw AU engine being fitted**
vermiltina is offline   Reply With Quote Multi-Quote with this Post
Old 29-05-2008, 08:11 PM   #14
DEVL-XR
EBII XR6
 
DEVL-XR's Avatar
 
Join Date: Jul 2006
Location: Bendigo. Victoria
Posts: 5,278
Tech Writer: Recognition for the technical writers of AFF - Issue reason: Writing tech article(s) 
Default

Far out thats crazy, need to see some video's of it down the quarter!
__________________
DEVLXR
DEVL-XR is offline   Reply With Quote Multi-Quote with this Post
Old 29-05-2008, 08:31 PM   #15
Krakey
love thy ford
 
Krakey's Avatar
 
Join Date: Dec 2006
Location: wangaratta, vic
Posts: 92
Default

haha ive actually just been helping working on it for a couple of weeks now and let me say, it is a serious machine!

Krakey
__________________
AUII VCT XR6 MANUAL
Krakey is offline   Reply With Quote Multi-Quote with this Post
Old 29-05-2008, 08:44 PM   #16
BADEF-6
Moates Ostrich 2.0 User
 
BADEF-6's Avatar
 
Join Date: Mar 2008
Location: Townsville
Posts: 386
Default

thats nuts!
__________________


Daily: Golf 6 GTD. Black Magic, ABT goodies. 153.2fwkw 480nm @1500rpm

New Project: 1973 GTR Torana 2door. Track/Targa/Hill Climber. Soon to have a 4.0L OHC and a Turbo.

EF Fairmont: Twin Charged 6 -481rwkw 1038nm @3500rpm (Fully Engineered) (SOLD)


IM BACK
BADEF-6 is offline   Reply With Quote Multi-Quote with this Post
Old 29-05-2008, 09:05 PM   #17
Nostalgia
LOW AND SLOW
 
Nostalgia's Avatar
 
Join Date: Sep 2006
Location: Geelong.
Posts: 2,644
Default

OH MY GOD. If this is true, then i am lost for words.
Nostalgia is offline   Reply With Quote Multi-Quote with this Post
Old 29-05-2008, 09:09 PM   #18
Booka
OzECruisers FTW
 
Booka's Avatar
 
Join Date: Jul 2007
Location: In the Shed
Posts: 631
Default

Thats bloody insane!!!!.... how much and give it too me
__________________
Dont waste time... or time will waste you


EB II GLi, AU 4lt and auto conversion :evil3: , 17" mags, Tub's on the way, Sound system, Tinted windows, Lowered.
Booka is offline   Reply With Quote Multi-Quote with this Post
Old 29-05-2008, 09:15 PM   #19
Krakey
love thy ford
 
Krakey's Avatar
 
Join Date: Dec 2006
Location: wangaratta, vic
Posts: 92
Default

Quote:
Originally Posted by NostalgEA
OH MY GOD. If this is true, then i am lost for words.
oh its true alright. just been gotten up and running today. a few more things to be tweaked but is running!

Krakey
__________________
AUII VCT XR6 MANUAL
Krakey is offline   Reply With Quote Multi-Quote with this Post
Old 29-05-2008, 10:38 PM   #20
InfernoSR
Sales Representative
 
InfernoSR's Avatar
 
Join Date: Mar 2007
Location: Young
Posts: 5,314
Technical Contributor: For members who share their technical expertise. - Issue reason: For research and posted write up on cooling system care and repair in AU.COM and offering help where possible 
Default

Thats amazing! well done!
__________________
InfernoSR is offline   Reply With Quote Multi-Quote with this Post
Old 29-05-2008, 11:38 PM   #21
Rob
Living the dream
 
Join Date: Nov 2005
Location: NSW
Posts: 1,795
Default

How can I get 660rwhp? Exhaust? Pod filter? Racing stripes?

Thanks.

Rob is offline   Reply With Quote Multi-Quote with this Post
Old 30-05-2008, 09:09 AM   #22
DEVL-XR
EBII XR6
 
DEVL-XR's Avatar
 
Join Date: Jul 2006
Location: Bendigo. Victoria
Posts: 5,278
Tech Writer: Recognition for the technical writers of AFF - Issue reason: Writing tech article(s) 
Default

Quote:
Originally Posted by Rob
How can I get 660rwhp? Exhaust? Pod filter? Racing stripes?

Thanks.

Don't forget the altezza's and alloy racing wing!
__________________
DEVLXR
DEVL-XR is offline   Reply With Quote Multi-Quote with this Post
Old 30-05-2008, 08:03 PM   #23
Sorted
OzEcruisers PRESIDENT
 
Sorted's Avatar
 
Join Date: Mar 2005
Location: Melbz
Posts: 15,761
Community Builder: In recognition of those who have helped build the AFF community. - Issue reason: For all the contributions you make to the AFF community. 
Default

Thats awesome, love the huge difference when the exhaust is dumped, wonder if i dump my exhaust if i will get the same increase in power lol
Sorted is offline   Reply With Quote Multi-Quote with this Post
Old 30-05-2008, 08:13 PM   #24
FryXR
In need of more BOOST!!!
 
FryXR's Avatar
 
Join Date: Aug 2007
Location: S.E. Melb
Posts: 315
Default

far out, check the dyno sheet, looks like he is running just under 30 psi not 20 psi, thats some serious boost
FryXR is offline   Reply With Quote Multi-Quote with this Post
Old 30-05-2008, 08:49 PM   #25
Krakey
love thy ford
 
Krakey's Avatar
 
Join Date: Dec 2006
Location: wangaratta, vic
Posts: 92
Default

yea its 30psi. the car just needs a tune then it shall be making some BIG power!

Krakey
__________________
AUII VCT XR6 MANUAL
Krakey is offline   Reply With Quote Multi-Quote with this Post
Old 30-05-2008, 08:53 PM   #26
DEVL-XR
EBII XR6
 
DEVL-XR's Avatar
 
Join Date: Jul 2006
Location: Bendigo. Victoria
Posts: 5,278
Tech Writer: Recognition for the technical writers of AFF - Issue reason: Writing tech article(s) 
Default

Quote:
Originally Posted by Krakey
yea its 30psi. the car just needs a tune then it shall be making some BIG power!

Krakey
Yeah because at the moment its not! Still can't get over it!
__________________
DEVLXR
DEVL-XR is offline   Reply With Quote Multi-Quote with this Post
Old 30-05-2008, 10:52 PM   #27
vermiltina
Custom e-series owner
 
vermiltina's Avatar
 
Join Date: Feb 2006
Location: wodonga vic
Posts: 840
Default

it was tuned with the 3 ich but now with the 4 inch it needs a new tune
__________________
88 ea falcon
fresh paint, 20 inch chrome wheels, ed xr front, scorcher body kit, ef/el mirrors and door trims, UPC 330mm twin piston big brakes, manual, front adjustable coil overs, 2.5 inch exhaust, twin thermos etc etc
**atomic built 660kw AU engine being fitted**
vermiltina is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 11:49 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL