1600 with throttle bodies

binalong · 13-09-2007, 08:48 PM

has anyone put m/bike throttle bodies onto a "kent' donk, if so what sort,and manifold ??, as I have a MOTEC ecu etc and want to efi my motor as cheap as I can pls

beem · 14-09-2007, 03:12 AM

Quote:

Originally Posted by binalong

has anyone put m/bike throttle bodies onto a "kent' donk, if so what sort,and manifold ??, as I have a MOTEC ecu etc and want to efi my motor as cheap as I can pls

Hi there go to www.jenvey.co.uk or www.burtonpower.com i highly recomend the jenvey throttle bodies great piece of kit.

binalong · 14-09-2007, 10:17 AM

Thanx, great links... I was hoping for a local supply, or if someone has the info required, as in they made a manifold and used a certain type of T/B`s etc, or I was thinking of using an EA centrepoint injection set up on my webber manifold, but it still needs tweaking anyway as the EA body is wider

beem · 15-09-2007, 06:35 AM

Quote:

Originally Posted by binalong

Thanx, great links... I was hoping for a local supply, or if someone has the info required, as in they made a manifold and used a certain type of T/B`s etc, or I was thinking of using an EA centrepoint injection set up on my webber manifold, but it still needs tweaking anyway as the EA body is wider

On the crossflow pushrod engine,Jenvey are a complete must the only throttle bodies used in Ireland and Uk rallying.Wouldnt recomend fabricating your own manifold,save yourself the hassle and buy one deisgned specifically for your engine. Also the twin bore throttle bodies are the ones to use on the crossflow with exterior fuel rail and 4 seperate injectors. To improve torque go for individual throttle bodies.

binalong · 15-09-2007, 08:04 PM

thanks, my motor is fully worked, larger valves, ported, 28/68 cam, 40thou over, told to run prem unleaded, 11- 1 compression, elec ign,extractors-2.25 exhaust..... ant thoughts on the EA centre point ??, seems easy enough,just a bit of fiddling tho

beem · 16-09-2007, 03:38 AM

Quote:

Originally Posted by binalong

thanks, my motor is fully worked, larger valves, ported, 28/68 cam, 40thou over, told to run prem unleaded, 11- 1 compression, elec ign,extractors-2.25 exhaust..... ant thoughts on the EA centre point ??, seems easy enough,just a bit of fiddling tho

I honestly have no clue about the EA centre point,i presume its a single point injection system.