AU I6 - What can it do? (updated) 14.22 - Page 2

MYLO_XR6 · 19-08-2006, 07:47 PM

what rwkw's and nm of torque are you getting? @what rpm?

and whats the overall "race" weight of the car?

SpoolMan · 19-08-2006, 09:48 PM

Quote:

Originally Posted by Tri Power 289

60ft: 2.014
60ft: 1.981
60ft: 1.970

60ft: 2.009

Awsome 60 footers from a N/A AU 6 well done....

FS5 · 19-08-2006, 10:44 PM

wow ,i didn't see your 60ty time .thats awsome .

X ORSMXR · 20-08-2006, 12:00 AM

Hey Guys ORSM times l bet Terry your rapped about the old girl now.......

l think there is alot more to get yet......!!!!!!!!!!

Tri Power 289 · 20-08-2006, 10:51 AM

Quote:

Originally Posted by DeathXR

Awesome Terry! Well done guys!!!
You forget to let me know you were going again though... :(

My Bad!!
Sorry Dude, the fact that we were going out was sort of sprung on me after this thread was started.
We will catch up at Heathcote on the 9th.

Quote:

Originally Posted by ORSMXR

Hey Guys ORSM times l bet Terry your rapped about the old girl now.......
l think there is alot more to get yet......!!!!!!!!!!

Thanks Chris. I Think Chris F is going to eventually talk me into putting a cam in it but probably not before Heathcote on the 9th.

Rollin · 20-08-2006, 03:32 PM

Only .4 of a second to go before you catch up with us QLD'ers

I suppose if you put a cam in and a good tune you could do it

Tri Power 289 · 21-08-2006, 06:35 AM

Quote:

Originally Posted by Rollin

Only .4 of a second to go before you catch up with us QLD'ers

I suppose if you put a cam in and a good tune you could do it

I didn't realize (along with everyone else on the forums) there was a N/A AU6 running 13.8s up there.

Whose car would that be?

:

XRCIST · 21-08-2006, 04:25 PM

^^^I think that would be oed666's car. Its an eb with an au xr6 motor.

**Stav** · 21-08-2006, 04:31 PM

Quote:

Originally Posted by Tri Power 289

I didn't realize (along with everyone else on the forums) there was a N/A AU6 running 13.8s up there.

Whose car would that be?

:

I know that Brendan has a customer who was last running very low 14's.Chances are it is them.

TheSneakiness · 21-08-2006, 05:03 PM

Quote:

Originally Posted by XRCIST

^^^I think that would be oed666's car. Its an eb with an au xr6 motor.

ED actually.

It's a machine. 13.8 at 99mph.

**Chris** · 21-08-2006, 05:31 PM

Thats orsm for a stock AU motor.....whats the car weigh??

Mark351 · 21-08-2006, 06:47 PM

Quote:

Originally Posted by XRCIST

^^^I think that would be oed666's car. Its an eb with an au xr6 motor.

It's an ED though, not an AU. ED's are a little lighter.

XRCIST · 21-08-2006, 07:02 PM

Quote:

Originally Posted by DeathXR

It's an ED though, not an AU. ED's are a little lighter.

I didnt say it was an AU (i though it was an eb but its an ed), i said it had an au motor.

hamo · 23-08-2006, 05:28 PM

Good Stuff Tri power, I wish I could have had a 60-foot like that, with no edit at the time it was never achievable.
Go the silver AU’s.

**Stav** · 24-08-2006, 11:32 PM

Just a question guys.Did you get a timeslip as I would not mind having a sticky.

Tri Power 289 · 25-08-2006, 11:24 AM

Quote:

Originally Posted by hamo

Good Stuff Tri power, I wish I could have had a 60-foot like that, with no edit at the time it was never achievable.
Go the silver AU’s.

Thanks Hamo. I wish the edit was available when I had my XR8s (both manuals). I would love to have seen what they would have done with the same treatment.
Look forward to meeting you at Heathcote.

Quote:

Originally Posted by useless

Just a question guys.Did you get a timeslip as I would not mind having a sticky.

Stav, I have just posted a new timeslip in the database.
Are you coming down for heathcote on the 9th?

TheSneakiness · 25-08-2006, 12:03 PM

Quote:

Originally Posted by Chris

Thats orsm for a stock AU motor.....whats the car weigh??

It's not exactly stock, and it doesn't exactly sit in the engine bay of an AU...

It's in an ED, as far as I know, it has a big cam, exhaust, chip, T5, two piece tailshaft and diff work. I'm pretty sure thats it.

Quicklier · 25-08-2006, 02:33 PM

Wow, low 14's is pretty respectable. go the bolt on's!

I'd be happy with getting a 15.5 (apparently that's what my car did out of the factory).

**Stav** · 25-08-2006, 09:27 PM

Quote:

Originally Posted by Tri Power 289

Thanks Hamo. I wish the edit was available when I had my XR8s (both manuals). I would love to have seen what they would have done with the same treatment.
Look forward to meeting you at Heathcote.

Stav, I have just posted a new timeslip in the database.
Are you coming down for heathcote on the 9th?

I would like to but cannot. I am finding I am not the same since my illness . I dont want to end up dead so long tiring driving trips aren't in my agenda. I am tempted to come down just to see what you guys look like.But family/work also dont let it happen.

It would have been nice to meet all you wonderfull folks down south and line yourself up mate..hheheh.

Tri Power 289 · 26-08-2006, 09:37 AM

Quote:

Originally Posted by useless

I would like to but cannot. I am finding I am not the same since my illness . I dont want to end up dead so long tiring driving trips aren't in my agenda. I am tempted to come down just to see what you guys look like.But family/work also dont let it happen.

It would have been nice to meet all you wonderfull folks down south and line yourself up mate..hheheh.

Thats OK mate, I understand. I'm sure I'll make it up there sometime soon. If not for a street meet, then definately for a Top Fuel event. We'll catch up then.

:

sfr rob · 26-08-2006, 02:17 PM

oh bother... this makes me think 3 times about taking my ba to heathcote... cant have an i6 AU wipe the floor with me now!!!
might start playing with the AU.
It's great to see so much is being done with the AU's.

Rob

SpoolMan · 26-08-2006, 05:09 PM

I seen a silver Au car today with steelies on rear, it looked like Tripowers car....were you out and about in the Cambllefield area around 1.30pm today..

Craig · 26-08-2006, 05:19 PM

I doubt it Mark, Terry lives in Mt Martha and he has nice clean mag wheels. His number plate is XR6HP.....

Cheers CC

SpoolMan · 26-08-2006, 06:00 PM

Quote:

Originally Posted by Craig@ACE

I doubt it Mark, Terry lives in Mt Martha and he has nice clean mag wheels. His number plate is XR6HP.....

Cheers CC

Yes Mt Martha is a long way from here....how long does the trip take?

**Chris** · 26-08-2006, 06:20 PM

Quote:

Originally Posted by SpoolMan

I seen a silver Au car today with steelies on rear, it looked like Tripowers car....were you out and about in the Cambllefield area around 1.30pm today..

That was possibly a client - did a tune on one today, steelies on back, silver in colour, however, not tri powers.....

Tri Power 289 · 27-08-2006, 06:59 AM

Quote:

Originally Posted by SpoolMan

Yes Mt Martha is a long way from here....how long does the trip take?

I was very close to heading up to see Chris on Friday but it's about a 250k round trip to go to ACE then Bluepower. Takes an hour and a half each way to ACE alone. Long way to just drop in for a chat.
(But then again, its very hard to get Chris on the phone!)
I'd say ive probably done about 3000ks, just travelling to ACE over the last 12mths.
But it's been well worth it!!! :evilsasmo

ClassicAU · 14-09-2006, 02:51 PM

I was just doing a bit of a search and came up on this thread. after seeing Terry's car at Heathcote last weekend, I am so inspired to start some work on my own AU! That is an awesome AU you have there Terry, I am so impressed on how good it runs with pretty much all bolt on's! I have already done an 3.73 LSD from Northern Diffs, so I am looking at doing up some power. Chris has said he will give it a look with an edit, so I am really excited to join the clan of fast AU I6's! I am not expecting my car to go anywhere near as fast as the XR6HP, but low 15's would be awesome! Keep up the great work guys! :sm_headba

XRCIST · 14-09-2006, 04:03 PM

Quote:

Originally Posted by ClassicAU

I was just doing a bit of a search and came up on this thread. after seeing Terry's car at Heathcote last weekend, I am so inspired to start some work on my own AU! That is an awesome AU you have there Terry, I am so impressed on how good it runs with pretty much all bolt on's! I have already done an 3.73 LSD from Northern Diffs, so I am looking at doing up some power. Chris has said he will give it a look with an edit, so I am really excited to join the clan of fast AU I6's! I am not expecting my car to go anywhere near as fast as the XR6HP, but low 15's would be awesome! Keep up the great work guys! :sm_headba

I see you have been bitten by the bug now. Trust me, you say low 15s now but when you get there and stay there for a while you will want to go faster lol.

Tri Power 289 · 14-09-2006, 08:27 PM

Quote:

Originally Posted by ClassicAU

I was just doing a bit of a search and came up on this thread. after seeing Terry's car at Heathcote last weekend, I am so inspired to start some work on my own AU! That is an awesome AU you have there Terry, I am so impressed on how good it runs with pretty much all bolt on's! I have already done an 3.73 LSD from Northern Diffs, so I am looking at doing up some power. Chris has said he will give it a look with an edit, so I am really excited to join the clan of fast AU I6's! I am not expecting my car to go anywhere near as fast as the XR6HP, but low 15's would be awesome! Keep up the great work guys! :sm_headba

Thanks ClassicAU. Sounds like you're on the right path with your car.

Sorry I wasn't able to put on a bit more of a show on Saturday, being a bit off my best for some reason. 14.7's not what I was expecting.

:

But still, I can tell you, you will have a tough car if you can get those low 15's and as you're dealing with Chris, they wont be too far away.

Should be heading back out to Calder fairly soon - (hopefully for some more 14.2's or better) you might find it worthwhile to come out yourself. Traction tends to be a lot better there.

Cheers

:

Craig · 14-09-2006, 08:57 PM

Terry, i think it is time we stopped mucking around with your car and started to get serious. A nice little package arrived from America today that we can use. I will call you tomorrow with a game plan. Unfortunately i can't give you a BA XT 3 valve to run around in while i work on your car but will a Toyota Corona suffice????

Cheers Craig