|
06-12-2017, 02:14 AM | #1 | ||
Starter Motor
Join Date: Sep 2014
Posts: 7
|
Hi, I have blown the fusible link and replaced it with a after market link. my question is what amps should it be?
Thanks. |
||
06-12-2017, 07:47 AM | #2 | ||
Chairman & Administrator
Join Date: Dec 2004
Location: 1975
Posts: 107,081
|
They range from 120A - 175A dependant on engine.
Cheers Russ
__________________
Observatio Facta Rotae
|
||
06-12-2017, 09:40 AM | #3 | ||
Starter Motor
Join Date: Sep 2014
Posts: 7
|
Thanks for the quick reply. I have a diesel so would you go for the 175 amp ?
Thanks again. |
||
12-12-2017, 08:30 AM | #4 | ||
Chairman & Administrator
Join Date: Dec 2004
Location: 1975
Posts: 107,081
|
I believe the diesel one (2.0L TDCi) is 150A.
Cheers Russ
__________________
Observatio Facta Rotae
|
||
14-12-2017, 11:06 AM | #5 | ||
Starter Motor
Join Date: Sep 2014
Posts: 7
|
Thanks for your help. I’ve put a 150 in and started it 3 times in quick succession and it was ok. Also ran it with lights on hi beam and anything else to check the supply from the alternator and was all ok.
Thanks again👍 |
||