|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
| Drag Racing Discuss Drag Racing here be it dirt or tarmac. Sponsored by Sydney Dragway. |
 |
|
|
Thread Tools | Display Modes |
23-10-2013, 08:45 PM
|
#61 | |||
|
Regular member
Join Date: Jun 2011
Location: Brisbane
Posts: 907
|
Quote:
__________________
CURRENT 2013 335 GT - BMC twin filter, Herrod IC, injectors, fuel pump, oil breather, SC pulley and balancer, X-force 2 1/2" cat back with high flow cats = 453rwkw. Thanks to Lee at Real Dyno performance. OLD 2010 FPV F6 FG - Herrod CAI, Pedders extreme XA's, Whiteline fr & rear swaybars, PWR stepped IC, injectors, turbo dump pipe with Venom cat, Herrod piping kit = 350rwkw |
|||
|
|
|
05-11-2013, 08:12 PM
|
#62 | ||
|
FF.Com.Au Hardcore
Join Date: Sep 2012
Location: Sydney
Posts: 718
|
Bumping thread, taking the Focus ST out to WSID tomorrow night, first timer, really looking forward to it. Not sure on tyre pressure, or ESC sport mode or off completely. Will play around a bit and see how I go. Any front wheel drive experience here to offer advice?
__________________
2018 Ford Focus RS |
||
|
|
|
|
02-08-2014, 02:36 PM
|
#63 | ||
|
Regular member
Join Date: Jun 2011
Location: Brisbane
Posts: 907
|
Got the F6 written off and got myself a GT instead - I took the F6 to the drags last time and from all the tips here was stalling to about 2000rpm or so to launch. I wanna see what the stock GT will do down the 1/4 mile before a tune sometime next year.
From your experience, is this the same with the V8 or would a lower stall do? Any other differences in launching the V8 vs the turbo 6 would be appreciated..
__________________
CURRENT 2013 335 GT - BMC twin filter, Herrod IC, injectors, fuel pump, oil breather, SC pulley and balancer, X-force 2 1/2" cat back with high flow cats = 453rwkw. Thanks to Lee at Real Dyno performance. OLD 2010 FPV F6 FG - Herrod CAI, Pedders extreme XA's, Whiteline fr & rear swaybars, PWR stepped IC, injectors, turbo dump pipe with Venom cat, Herrod piping kit = 350rwkw |
||
|
|
|
| This user likes this post: |
|
04-08-2014, 01:04 AM
|
#64 | ||
|
FF.Com.Au Hardcore
Join Date: Jun 2010
Posts: 4,760
|
Cat600 should be able to give you some tips.
But it's going to depend on the track prep and your tyres. Stock tune would have driveline protection / torque management I am guessing so that would limit your ability to launch. |
||
|
|
|
|
04-08-2014, 01:12 AM
|
#65 | |||
|
FF.Com.Au Hardcore
Join Date: Jun 2010
Posts: 4,760
|
Quote:
|
|||
|
|
|
|
04-08-2014, 01:26 AM
|
#66 | ||
|
I miss my wheelbarrow
 
Join Date: Jan 2005
Location: Bluestreak Performance
Posts: 11,503
|
Stock converter you're often better off with stepping off the brake and then onto the gas (kinda like down on one as you are releasing the other, because the converter is so tight it will blow the tyres off if you load it up too hard, but preloading an IRS is the way to go fast so that's why I started off with a loose high stall on the V8 (4200 rpm)... Seems to work just gotta get the suspension setup right now
Daniel |
||
|
|
|
|
04-08-2014, 06:09 AM
|
#67 | ||
|
Regular member
Join Date: Jun 2011
Location: Brisbane
Posts: 907
|
Ok so I don't really even need to stall/rev it up any - just modulate the right foot? (Sorry shoulda mentioned it's an auto).
__________________
CURRENT 2013 335 GT - BMC twin filter, Herrod IC, injectors, fuel pump, oil breather, SC pulley and balancer, X-force 2 1/2" cat back with high flow cats = 453rwkw. Thanks to Lee at Real Dyno performance. OLD 2010 FPV F6 FG - Herrod CAI, Pedders extreme XA's, Whiteline fr & rear swaybars, PWR stepped IC, injectors, turbo dump pipe with Venom cat, Herrod piping kit = 350rwkw |
||
|
|
|
|
| Thread Tools | |
| Display Modes | |
|
|
Re: Drag racing tips
Linear Mode
