|
|
|
|
|
02-05-2013, 09:36 AM
|
#1 | ||
|
Starter Motor
Join Date: Jul 2012
Posts: 21
|
is there a positive and negative on bulbs for a cluster for a ford au1 series can anyone help me
Last edited by PeterShaz; 02-05-2013 at 09:47 AM. |
||
|
|
|
02-05-2013, 02:43 PM
|
#2 | ||
|
Regular Member
Join Date: Jan 2006
Posts: 454
|
They are not marked, as incandescent bulbs are not polarity consciousness
__________________
BUILD AU II FAIRMONT GHIA HERS AU II Fairmont Ghia 7" DVD/GPS Radio 19" Wheels HIS FG XR8 Ute Lux Pack Tech Pack Touch Screen GPS |
||
|
|
|
|
02-05-2013, 04:35 PM
|
#3 | ||
|
Starter Motor
Join Date: Jul 2012
Posts: 21
|
I replaced all bulbs and stillwont light up but where the climate control is that dims with the switch but the cluster wont
|
||
|
|
|
|
02-05-2013, 06:48 PM
|
#4 | |||
|
Regular Member
Join Date: Jan 2006
Posts: 454
|
Quote:
__________________
BUILD AU II FAIRMONT GHIA HERS AU II Fairmont Ghia 7" DVD/GPS Radio 19" Wheels HIS FG XR8 Ute Lux Pack Tech Pack Touch Screen GPS |
|||
|
|
|
|
02-05-2013, 07:14 PM
|
#5 | ||
|
Auto Nerd
Join Date: Feb 2012
Location: Sydney
Posts: 808
|
What can sometimes happen is that those aftermarket bulbs are half a millimeter out and the metal contacts are not touching from the circuit board to the light bulb.
You will have to take the panel out and put it on the bench. Good idea to check you have battery voltage and ground on the two metal contacts either with a multimeter or testlight. I cut two little pieces of aluminium foil and fold them into the shape of the metal contacts so that they are around 1mm in thickness. Then simply place on the back of those metal contacts on the circuit board and screw the bulb in over the top. Everything then should be locked in tight. |
||
|
|
|
| This user likes this post: |
cluster for a ford fairmont au1
Linear Mode
