Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Ford Australia Vehicles > Small and Mid Sized Cars > Mondeo

Reply
 
Thread Tools Display Modes
Old 22-02-2021, 08:46 AM   #1
Deeks
Starter Motor
 
Join Date: Dec 2020
Posts: 3
Default odb port not working and car wont start 2009 tdci diesel

My sons car lost power whilst driving it and after pulling over he couldnt start it (tries to crank but wont start). Still wont start after sitting overnight.
RACV came and advised that there was no power at the ODB port to diagnose further so left it at that and said an electrical fault. All other electrics seem fine (other than a blown tail light globe which we knew about).
I'll get a replacement fuse for the ODB a little later today but wondering if there is a relationship between ODB and failure to start?

Any other simple troubleshooting I can try before having to get it towed to Ford for them to look at?
Deeks is offline   Reply With Quote Multi-Quote with this Post
Old 22-02-2021, 10:13 AM   #2
Deeks
Starter Motor
 
Join Date: Dec 2020
Posts: 3
Default Re: odb port not working and car wont start 2009 tdci diesel

Replaced the ODB fuse but same issue.
Pulled the fuel pump fuse and exact same issue. It feels like more of a fuel pump problem. Not sure why the ODB fuse would blow unless the RACV guy or previous mechanic somehow killed it when they were checking faults.
Deeks is offline   Reply With Quote Multi-Quote with this Post
Old 22-02-2021, 01:45 PM   #3
aussiblue
FG XR6 Ute & Sedan
Donating Member3
 
Join Date: Oct 2006
Location: Bibra Lake WA
Posts: 22,300
Technical Contributor: For members who share their technical expertise. - Issue reason: Has been floating around the oze tech section for a long time and is always there to give advice when people have an issue. 
Default Re: odb port not working and car wont start 2009 tdci diesel

Check this: https://www.youtube.com/watch?v=qCAq...b_channel=groc
__________________
regards Blue
aussiblue is offline   Reply With Quote Multi-Quote with this Post
Old 22-02-2021, 01:54 PM   #4
Deeks
Starter Motor
 
Join Date: Dec 2020
Posts: 3
Default Re: odb port not working and car wont start 2009 tdci diesel

Just had RACV have another look now they could get to the fault codes. No faults, fuel pressure is OK and his suspicion is that the timing belt/chain has possibly slipped. Will get it to a mechanic tomorrow to diagnose further.
Deeks is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Reply

Thread Tools
Display Modes

Forum Jump


All times are GMT +11. The time now is 04:09 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL