Go Back   Australian Ford Forums > Ford Australia Vehicles > Small and Mid Sized Cars > Fiesta, Festiva and Ka

Reply
 
Thread Tools Display Modes
Old 02-06-2007, 07:07 PM   #1
MoreHPformyXR6
FF.Com.Au Hardcore
 
MoreHPformyXR6's Avatar
 
Join Date: Jan 2006
Location: FoMoCo
Posts: 3,441
Default 2006 WQ Fez

Hi Guy's

My mum has a 2006 WQ Fez its been a good little car done abut 7500km with no real issues what so ever. The only thing that she will get Ford to look at shortly on maybe a total of 6 occasions it hasnt started at all try again & it goes fine its Auto & is always in Park when she starts her. Anyone had a similar problem? I think its a Sept 06 build (is it just a software/flash upgrade required)

__________________
FGX XR6 Lightning Strike Sedan

BA XR6 Mk II Shockwave Sedan - Now Sold - gone but not forgotten

mods: 20% under drive, Pacemaker Comps 4495' (ceramic coated) , 3' Metal Cat, XR6T exhaust - twin 3' tips, F6 CAI, K&N panel filter, PWR trans cooler, customed tuned by Heinrich Performance Tuning HPT 183.7rwkw.


Quote:
Originally Posted by ATMO SIX
You have become the new SLOANY mate, no real quality to your current post(s).
MoreHPformyXR6 is offline   Reply With Quote Multi-Quote with this Post
Old 03-06-2007, 05:07 PM   #2
MoreHPformyXR6
FF.Com.Au Hardcore
 
MoreHPformyXR6's Avatar
 
Join Date: Jan 2006
Location: FoMoCo
Posts: 3,441
Default

Quote:
Originally Posted by MoreHPformyXR6
Hi Guy's

My mum has a 2006 WQ Fez its been a good little car done abut 7500km with no real issues what so ever. The only thing that she will get Ford to look at shortly on maybe a total of 6 occasions it hasnt started at all try again & it goes fine its Auto & is always in Park when she starts her. Anyone had a similar problem? I think its a Sept 06 build (is it just a software/flash upgrade required)
Bump Bump anyone able to help?
__________________
FGX XR6 Lightning Strike Sedan

BA XR6 Mk II Shockwave Sedan - Now Sold - gone but not forgotten

mods: 20% under drive, Pacemaker Comps 4495' (ceramic coated) , 3' Metal Cat, XR6T exhaust - twin 3' tips, F6 CAI, K&N panel filter, PWR trans cooler, customed tuned by Heinrich Performance Tuning HPT 183.7rwkw.


Quote:
Originally Posted by ATMO SIX
You have become the new SLOANY mate, no real quality to your current post(s).
MoreHPformyXR6 is offline   Reply With Quote Multi-Quote with this Post
Old 03-06-2007, 05:15 PM   #3
kiwijohn42
Death B4 Decaf
 
kiwijohn42's Avatar
 
Join Date: Mar 2006
Location: South Hobart
Posts: 731
Default

A few times lately mine hasn't started until the third try. I assume I've bumped the accelerator getting in. I thought it was just me.
__________________
06 fiesta Zetec in Tango. Factory scuff plates, mats, spoiler & leather gear knob. K&N panel filter. Focus clear side indicators. Colour coded.
kiwijohn42 is offline   Reply With Quote Multi-Quote with this Post
Old 03-06-2007, 06:51 PM   #4
photn
AFF Post NAZI
 
photn's Avatar
 
Join Date: Mar 2006
Location: Albury
Posts: 3,634
Default

it has to do with the ECU! there have been other occasions where other people have had the same problem....

as far as i know they have just had their Ecu reset! and it has worked fine afterwards.
__________________
"Its not always about power, The car has to handle Beautifully"

photn is offline   Reply With Quote Multi-Quote with this Post
Old 03-06-2007, 09:28 PM   #5
Ives
FF.Com.Au Hardcore
 
Ives's Avatar
 
Join Date: May 2006
Location: Sydney, NSW
Posts: 2,368
Default

Yes I've had that once or twice. No dramas really...

Ford Fiesta = the best new car you can get for $20,000 or under. Period.
Ives is offline   Reply With Quote Multi-Quote with this Post
Old 03-06-2007, 09:33 PM   #6
MoreHPformyXR6
FF.Com.Au Hardcore
 
MoreHPformyXR6's Avatar
 
Join Date: Jan 2006
Location: FoMoCo
Posts: 3,441
Default

Quote:
Originally Posted by photn
it has to do with the ECU! there have been other occasions where other people have had the same problem....

as far as i know they have just had their Ecu reset! and it has worked fine afterwards.
Thank's for that it will go back to Ford Service under warranty shortly.
__________________
FGX XR6 Lightning Strike Sedan

BA XR6 Mk II Shockwave Sedan - Now Sold - gone but not forgotten

mods: 20% under drive, Pacemaker Comps 4495' (ceramic coated) , 3' Metal Cat, XR6T exhaust - twin 3' tips, F6 CAI, K&N panel filter, PWR trans cooler, customed tuned by Heinrich Performance Tuning HPT 183.7rwkw.


Quote:
Originally Posted by ATMO SIX
You have become the new SLOANY mate, no real quality to your current post(s).
MoreHPformyXR6 is offline   Reply With Quote Multi-Quote with this Post
Old 06-06-2007, 02:10 AM   #7
Lisho
Starter Motor
 
Join Date: Apr 2007
Location: Darwin, NT
Posts: 15
Default

I started mine the other day. It took a few goes.. started.. spluttered.. felt like it was going to stall then felt like it was going to pull through.. then stalled. That's it though. I just put it down to the hot day and the fact I'd just turned the motor off minutes earlier. 1600 Km on it now.
__________________
07 Fiesta Zetec Ocean Blue
Lisho is offline   Reply With Quote Multi-Quote with this Post
Old 06-06-2007, 02:22 AM   #8
Steffo
LPG > You
 
Steffo's Avatar
 
Join Date: Dec 2004
Location: Sydney, NSW, Australia
Posts: 4,277
Default

Quote:
Originally Posted by MoreHPformyXR6
Hi Guy's

My mum has a 2006 WQ Fez its been a good little car done abut 7500km with no real issues what so ever. The only thing that she will get Ford to look at shortly on maybe a total of 6 occasions it hasnt started at all try again & it goes fine its Auto & is always in Park when she starts her. Anyone had a similar problem? I think its a Sept 06 build (is it just a software/flash upgrade required)
My old WP Zetec did that once. With the first batch of Shell Optimax Extreme (now V-Power Racing) I ever put in it. Never did it again after that, even using that fuel again.
__________________
LPG Lovers Association President & Member #1.

:
Steffo is offline   Reply With Quote Multi-Quote with this Post
Old 07-06-2007, 01:51 AM   #9
Als_Zetec
Rated G
 
Als_Zetec's Avatar
 
Join Date: Dec 2006
Location: The Hills
Posts: 177
Default

Steffo

now that you mention it, I only have that problem when using V-Power. I'd estimate that I have probs starting 1 in every 30 starts.

When using Vortex98, I have far fewer problems - say 1 in 65.

Rough figures, don't quote me
Als_Zetec is offline   Reply With Quote Multi-Quote with this Post
Old 07-06-2007, 02:45 AM   #10
Piotr
Non-Regular Member
 
Join Date: Oct 2006
Posts: 1,040
Default

Ive been using Shell fuel since i got the car and have no problems at all. A few of us here use shell alot and have no problems with it
Piotr is offline   Reply With Quote Multi-Quote with this Post
Old 07-06-2007, 08:52 AM   #11
morbo
Regular Member
 
Join Date: Feb 2007
Location: melbourne
Posts: 106
Default

Had the car since Jan 07 and its done it three times. Don't know what fuel it was drinking at the time but it usually diets on Shell 95+98 and Caltex 98 (can't remember the names).

I've been using the car almost twice every single day so i'm not really alarmed at the moment. Besides I'm too much of a lazy sod to try and get it fixed when i can just restart it again. 1/30 starts? That's pretty high though
morbo is offline   Reply With Quote Multi-Quote with this Post
Old 07-06-2007, 02:19 PM   #12
Ives
FF.Com.Au Hardcore
 
Ives's Avatar
 
Join Date: May 2006
Location: Sydney, NSW
Posts: 2,368
Default

I've used V-Power Racing for several months and I dont have any problems with the car. The car nearly carked it when BP's 95RON PULP was in the tank. Never buy 95RON again.

MoreHPformyXR6, maybe the Fiesta turned emo?
Ives is offline   Reply With Quote Multi-Quote with this Post
Old 07-06-2007, 10:48 PM   #13
morbo
Regular Member
 
Join Date: Feb 2007
Location: melbourne
Posts: 106
Default

Is it writing bad poetry and cutting itelf to feel real?
morbo is offline   Reply With Quote Multi-Quote with this Post
Old 07-06-2007, 11:11 PM   #14
photn
AFF Post NAZI
 
photn's Avatar
 
Join Date: Mar 2006
Location: Albury
Posts: 3,634
Default

roflmania.....
most probably.. it just needs to learn... along the tracks not accross.
__________________
"Its not always about power, The car has to handle Beautifully"

photn is offline   Reply With Quote Multi-Quote with this Post
Old 23-06-2007, 09:05 PM   #15
csv8
FF.Com.Au Hardcore
 
csv8's Avatar
 
Join Date: Dec 2004
Location: Central Q..10kms west of Rocky...
Posts: 8,303
Default

Mine does the same thing, start it, it sounds like plugs misfiring, turn off, restart all is ok..FORD couldnt find an ECU fault. Joys of owning a FORD !!!!!!!!!!!!!!!!!!!!
csv8 is offline   Reply With Quote Multi-Quote with this Post
Old 04-07-2007, 08:35 PM   #16
MoreHPformyXR6
FF.Com.Au Hardcore
 
MoreHPformyXR6's Avatar
 
Join Date: Jan 2006
Location: FoMoCo
Posts: 3,441
Default

Hey Guys,

As mentioned in my first post my Mum has a 2006 WQ LX Fez & I noted last weekend her little black plastic molding that attatches to the car under the front bumper sheet metal has come loose on drivers side edge I found a black plastic rivett/screw type thing on the driveway under this spot that fits in the holes in the black plastic molding. Now it will go to dealer for sure under warranty but Mum is still about 2 weeks off driving again after a shoulder reconstruction. Just wondered if its a common thing? As when you park it in car parks etc that black molding hangs rather low.

Im talking about the black plastic molding below the front bumper. This photo was taken when it was perfect.

__________________
FGX XR6 Lightning Strike Sedan

BA XR6 Mk II Shockwave Sedan - Now Sold - gone but not forgotten

mods: 20% under drive, Pacemaker Comps 4495' (ceramic coated) , 3' Metal Cat, XR6T exhaust - twin 3' tips, F6 CAI, K&N panel filter, PWR trans cooler, customed tuned by Heinrich Performance Tuning HPT 183.7rwkw.


Quote:
Originally Posted by ATMO SIX
You have become the new SLOANY mate, no real quality to your current post(s).
MoreHPformyXR6 is offline   Reply With Quote Multi-Quote with this Post
Old 04-07-2007, 08:41 PM   #17
photn
AFF Post NAZI
 
photn's Avatar
 
Join Date: Mar 2006
Location: Albury
Posts: 3,634
Default

its designed as a protector strip for your front bumper...

the rivet/screw is plastic so im pretty sure when they replace it.. thatll be the end of it...

things like that happen every now and then so...
__________________
"Its not always about power, The car has to handle Beautifully"

photn is offline   Reply With Quote Multi-Quote with this Post
Old 04-07-2007, 11:33 PM   #18
kiwijohn42
Death B4 Decaf
 
kiwijohn42's Avatar
 
Join Date: Mar 2006
Location: South Hobart
Posts: 731
Default

I scrape mine quite a lot too. Mainly on driveways. Haven't ripped it off yet.
__________________
06 fiesta Zetec in Tango. Factory scuff plates, mats, spoiler & leather gear knob. K&N panel filter. Focus clear side indicators. Colour coded.
kiwijohn42 is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 02:18 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL