![]() |
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 | ||
Cougar Owner
Join Date: Feb 2005
Location: Brisbane
Posts: 178
|
I'd like to add auto down to the driver's window of my AUIII XLS
I've looked at adapting the master switch unit from Ghia but couldn't figure out how to get it to fit into the ute two (2) switch moulding - like it was suggested in one of the other threads. I'd prefer to have just 2 window switches in the drivers side armrest, with auto down on drivers window Am I missing something?
__________________
Leon AUIII XLS with Tickford bits, 1968 XR7 (302W 4v roller cam), 1969 Convertible (302W),
|
||
![]() |
![]() ![]() |
![]() |
#2 | ||
FF.Com.Au Hardcore
Join Date: Aug 2006
Location: Salamander Bay
Posts: 5,427
|
can't be done without major rewiring the whole wiring harness and BEM are different you would need to modify a high series sedan main body harness then use a high series BEM and change both door harnesses, even then you would still have a 4 switch unit in the drivers door with 2 dead switches
__________________
[SIGPIC][/SIGPIC]
Everyone starts off with a bag full of luck and an empty bag of experience. The trick is to fill the experience bag before the luck bag is empty. "It is better to remain silent and be thought a fool than to speak out and remove all doubt." Start a new career as a bus driver Rides: FG2 XR6 stock at this stage but a very nice ride xc 4 DOOR X CHASER 5.8 UNDER RESTO |
||
![]() |
![]() ![]() |
![]() |
#3 | ||
I can count to potato!
Join Date: Sep 2007
Location: 127.0.0.1
Posts: 1,374
|
I was just thinking about the same thing today in my ute 'bout 2 hours ago. Damn I miss that auto-down button :(
__________________
AU III XR8 UTE |
||
![]() |
![]() ![]() |
![]() |
#4 | ||
FF.Com.Au Hardcore
Join Date: Apr 2008
Posts: 5,431
|
Hi. DEI ( http://www.directed.com.au ) have a window lift module which gives one touch up and one touch down without an alarm and with almost any alarm windows up on locking and with a suitable alarm you can add window vent (down 25mm at a time) or window open. Put one in a mates xh and its real trick. Cheers MD
__________________
![]() HI ![]() I'M MICHAEL ![]() 2003 ACID RUSH BA FUTURA WAGON ![]() light up window switches | auto on cruise control | doubleclick window lift from remote |
||
![]() |
![]() ![]() |
![]() |
#5 | ||
Cougar Owner
Join Date: Feb 2005
Location: Brisbane
Posts: 178
|
__________________
Leon AUIII XLS with Tickford bits, 1968 XR7 (302W 4v roller cam), 1969 Convertible (302W),
|
||
![]() |
![]() ![]() |
![]() |
#6 | |||
FF.Com.Au Hardcore
Join Date: Apr 2008
Posts: 5,431
|
Quote:
__________________
![]() HI ![]() I'M MICHAEL ![]() 2003 ACID RUSH BA FUTURA WAGON ![]() light up window switches | auto on cruise control | doubleclick window lift from remote |
|||
![]() |
![]() ![]() |
![]() |
#7 | |||
I can count to potato!
Join Date: Sep 2007
Location: 127.0.0.1
Posts: 1,374
|
Quote:
![]()
__________________
AU III XR8 UTE |
|||
![]() |
![]() ![]() |
![]() |
#8 | ||
FF.Com.Au Hardcore
Join Date: Apr 2008
Posts: 5,431
|
Hi. Try this one http://www.ebay.com.au/itm/Viper-DEI...#ht_548wt_1396 . Cheers MD
__________________
![]() HI ![]() I'M MICHAEL ![]() 2003 ACID RUSH BA FUTURA WAGON ![]() light up window switches | auto on cruise control | doubleclick window lift from remote |
||
![]() |
![]() ![]() |
![]() |
#9 | ||
I can count to potato!
Join Date: Sep 2007
Location: 127.0.0.1
Posts: 1,374
|
Mmm, that's a window lifter.
__________________
AU III XR8 UTE |
||
![]() |
![]() ![]() |
![]() |
#10 | |||
FF.Com.Au Hardcore
Join Date: Apr 2008
Posts: 5,431
|
Quote:
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]()
__________________
![]() HI ![]() I'M MICHAEL ![]() 2003 ACID RUSH BA FUTURA WAGON ![]() light up window switches | auto on cruise control | doubleclick window lift from remote |
|||
![]() |
![]() ![]() |
![]() |
#11 | ||
FF.Com.Au Hardcore
Join Date: Apr 2008
Posts: 5,431
|
Hi. Sorry I was wrong.....
![]() ![]() ![]() ![]() ![]() ![]() ![]()
__________________
![]() HI ![]() I'M MICHAEL ![]() 2003 ACID RUSH BA FUTURA WAGON ![]() light up window switches | auto on cruise control | doubleclick window lift from remote |
||
![]() |
![]() ![]() |
![]() |
#12 | |||
Cougar Owner
Join Date: Feb 2005
Location: Brisbane
Posts: 178
|
Quote:
Will post an update. Hopefully it will arrive tomorrow and I can get it done over easter
__________________
Leon AUIII XLS with Tickford bits, 1968 XR7 (302W 4v roller cam), 1969 Convertible (302W),
|
|||
![]() |
![]() ![]() |
![]() |
#13 | ||
I can count to potato!
Join Date: Sep 2007
Location: 127.0.0.1
Posts: 1,374
|
Awesome, cant wait to see a result!
__________________
AU III XR8 UTE |
||
![]() |
![]() ![]() |
![]() |
#14 | ||
Cougar Owner
Join Date: Feb 2005
Location: Brisbane
Posts: 178
|
OK - the PonyPerformance one touch window module kit will work in an AU ute
This is what you get in the kit ![]() and you need to follow these instructions ![]() but use the AU wiring diagram to find the right wires ![]() The wiring conversion from the Mustang swith to the AU switch is Blue/Black = Grey/Yellow White/Black = Yellow Yellow = Red Black = Black This is what you get in the kit Remove the Switches by gently levering the trailing edge of the switch panel. It is held in place by a spring clip ![]() Remove the plug from the switch (the white plug is the drivers window) - you have to reach between the switches and depress the catch while you wiggle the plug to break contact with the switch ![]() Eyeball the switch so you know where the wires run. Check that the grey/yellow wire is 12V when the the ignition switch is in accessories or ignition. ![]() If you wire the unit into the loom using the included wire tapping terminals, you will not be able to get the switches back into the arm rest because of the bulk of the terminals ![]() The unit will fit more easily if you solder the wires from the unit with the appropriate wires from the switch or join the wires by replacing the female terminals in the plug ![]() The one touch unit will fit inside the front or rear of the armrest ![]() Test that everything works before reinstalling it all ![]()
__________________
Leon AUIII XLS with Tickford bits, 1968 XR7 (302W 4v roller cam), 1969 Convertible (302W),
Last edited by leonbray; 14-04-2012 at 08:54 PM. |
||
![]() |
![]() ![]() |
![]() |
#15 | ||
I can count to potato!
Join Date: Sep 2007
Location: 127.0.0.1
Posts: 1,374
|
Wowee-whoa-whoh! Good stuff, I think I'm a purchase me one of these right now. Thanks mate!
__________________
AU III XR8 UTE |
||
![]() |
![]() ![]() |
![]() |
#16 | ||
The Destroyer
Join Date: Jun 2007
Location: Gold Coast
Posts: 2,245
|
Simple wiring instructions
Cut loom yellow. Plug/switch end of yellow to module black & white Module red- cut loom yellow Splice module yellow to loom red Splice module black to loom black Splice module green/yellow to loom brown/yellow.
__________________
Toy- Blown XR8 Ute. Black on black "Front-drive cars are for children" |
||
![]() |
![]() ![]() |