|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
25-09-2021, 08:23 PM
|
#1 | ||
|
Regular Member
Join Date: Jun 2005
Location: Tweed Heads
Posts: 404
|
Looking at getting my manual AU2 XR8 IRS Diff rebuilt with 3.91 gears.
Understand I will need to correct the speedo with a electronic corrector looking the most likely. Is this best picked up from behind the dash then I could mount the corrector up in the drivers fuse box access panel so I can access it if needed? Onto the gears looking at the dana spicer 3.91 and get the shop to shim to fit. Is there anything else I should be looking at for the diff while they are doing it or just a rebuild with the new gears? End goals for the car are around 350rwhp.
__________________
2001 AU2 220 XR8 - Build thread |
||
|
|
| This user likes this post: |
|
27-09-2021, 07:19 AM
|
#2 | ||
|
Regular Member
Join Date: Jan 2017
Posts: 160
|
I had to replace most of the knuckle ? joints in my old man's ts50 in the car if you've got it out check every connection and if it looks the slightest bit dodgy replace it there is a rebuild of an irs in the t series page don't know the link but I found it really helpful
|
||
|
|
|
Au irs lsd rebuild/upgrade
Linear Mode
