Reverse crunching - Page 2

Kariharnett · 15-05-2009, 12:17 PM

Quote:

Originally Posted by Piotr

In mine I find going 3rd-4th and then Reverse does the trick

So really your pushing your clutch in selecting third and fourth then reverse???!??!?!?
Lets say it takes 3 - 4 seconds to do that menouvre, at the same time you have your clutch in to do that........ wouldnt you think to just push your clutch in for 3 seconds to save wear and tear on having to unnesesary wear on the gear box?

Candyman2 · 15-05-2009, 12:22 PM

Quote:

Originally Posted by pitpal

Gave them a demo on it including leaving the clutch down for 2-3 secs in which they told me that i shouldnt have to do this.

Hopefully, the stories about Ford service techs are not true in this case because if they say we shouldn't have to do it then it should be fixable ...

Will look forward to what they can do for you and I'll see what they can sort out at our service tomorrow.

Piotr · 15-05-2009, 01:46 PM

Quote:

Originally Posted by Kariharnett

So really your pushing your clutch in selecting third and fourth then reverse???!??!?!?
Lets say it takes 3 - 4 seconds to do that menouvre, at the same time you have your clutch in to do that........ wouldnt you think to just push your clutch in for 3 seconds to save wear and tear on having to unnesesary wear on the gear box?

Id hate to see how slow your gear shifts are. The process is alot quicker than 3 seconds.

The gearbox would get no wear and tear from those movements

svo supporter · 15-05-2009, 07:51 PM

Another suggestion is, if the car is parked and you have to reverse out of your spot, select reverse prior to starting the car. No crunch then.

Candyman2 · 16-05-2009, 05:56 PM

Well, they dumped the gearbox oil and refilled it.

Gotta say, it is better.

I got the oil and filter change as well (supplied a fully synthetic I bought).

I was rather surprised how carbonised the old oil was after just 3,000km.

Was suggested the fuel economy should improve (seemed to be running rich) - they did the usual safety check, checked the ECU and error codes - all good.

Didn't apply the USB update - they said it already had the update done. Maybe it came in the software update the Germans emailed over.

They did a pretty good job I must admit. Goes against the horror stories that seemed to be around about Ford Service Depts.

I declined the wash and vacuum ofcourse.

All done in an hour and a half.

pitpal · 16-05-2009, 10:28 PM

Quote:

Originally Posted by Candyman2

Well, they dumped the gearbox oil and refilled it.

Gotta say, it is better.

I got the oil and filter change as well (supplied a fully synthetic I bought).

I was rather surprised how carbonised the old oil was after just 3,000km.

Was suggested the fuel economy should improve (seemed to be running rich) - they did the usual safety check, checked the ECU and error codes - all good.

Didn't apply the USB update - they said it already had the update done. Maybe it came in the software update the Germans emailed over.

They did a pretty good job I must admit. Goes against the horror stories that seemed to be around about Ford Service Depts.

I declined the wash and vacuum ofcourse.

All done in an hour and a half.

Why the gearbox oil after only 3000kms?

vztrt · 16-05-2009, 10:35 PM

Quote:

Originally Posted by greenfoam

Ford ran the T5 almost forever and they struggle to get into reverse on Holdens, it's the same box so surely they do the same on the Falcons.

Reverse is fine. Notchy from 2 to 3 and be a pain in 1st.

Candyman2 · 16-05-2009, 11:24 PM

Quote:

Originally Posted by pitpal

Why the gearbox oil after only 3000kms?

By request - to solve the reverse issue. Which is seems to have done.

greenfoam · 17-05-2009, 03:11 AM

Candyman what oil did you get put in it (the gearbox)

Candyman2 · 17-05-2009, 07:28 AM

Redline MT90 was used. Not sure what was in there before, the Ford guys didn't know either.

Candyman2 · 17-05-2009, 09:05 AM

Oh and they didn't know what to do about the carpet in the footwell. They were going to screw it to the rubber firewall lining but I told them not to bother.

Got home and I used some 3M industrial strength double sided tape (wiped both surfaces with meths) and stuck it down with that.

We walked up to the dealers yard while we were waiting- sheesh they have a few Fiestas on the yard. We counted 6 incl white, black, vision, silver and 2 of them were Zetecs !

That blue dash is a bit of an eyeful and I still can't get used to the purple dash either.

Kinda like the funky seat design in the LX's though

greenfoam · 17-05-2009, 12:04 PM

The girl that works at the local dealer here still doesn't have her Squeeze Zetec that she ordered in Feb as far as I know

KREEPIBUGGA · 19-05-2009, 01:31 PM

I get the same thing with our WQ LX 1.6 manual.
I'd go with waiting for 3 seconds. Works for me - my fiancee just slams it :S
When we told Ford about it, they told us all manual Fiestas do it.