Go Back   Australian Ford Forums > Ford Australia Vehicles > Small and Mid Sized Cars > Fiesta, Festiva and Ka

Reply
 
Thread Tools Display Modes
Old 18-01-2008, 12:47 AM   #1
chinw3e
no sacrifice, no victory
 
chinw3e's Avatar
 
Join Date: Oct 2006
Location: Narre Warren
Posts: 119
Default WQ Fog Light Upgrade

Hey everyone,

I bought fog lights off ebay a while back for a steal. The only thing wrong with them was that one off the clips had broken off. No matter. I finally got round to buying the other bits and pieces from the local Ford dealer. Fitted them this evening, and may I say, it was much easier than I had imagined.

What was needed for this upgrade:

Bezel: 6S61 19952BC55MW
6S61 19953BC55MW
Switch: 6S6T 13Z024 DA
Clips: W 700895 S300

The clips slot into the bumper and allow the lamps to be screwed in.

As I already had the lamps I didn't get the part number for them.

Things to note about upgrading fog lights in WQ Fiesta. Unlike the WP, there are already existing connectors just behind the LX bezels, so you don't need to buy any connecting wires. There is also no need for any brackets. The lamps simply sit inside the bumper and are held in by screws (or that's what i did anyway - if you decide to do this you'll see what I mean)

I also installed new bulbs to the main headlights and the fogs as I wanted to match them. I'll have pics up hopefully tomorrow after clean the car up a bit.

More mods coming very soon, hopefully before Small Ford Sunday.

__________________
2006 Panther Black Fiesta LX

Eibach Lowering Springs, Wiecher Sports Strut Brace, K&N panel filter, fog lights, crystal black side indicators, car mats, tinted windows
chinw3e is offline   Reply With Quote Multi-Quote with this Post
Old 18-01-2008, 01:08 PM   #2
Rimwar
On 'L' Plates
 
Join Date: Jan 2008
Location: Thornlie Western Australia
Posts: 18
Default

Quote:
Originally Posted by chinw3e
Hey everyone,

I bought fog lights off ebay a while back for a steal. The only thing wrong with them was that one off the clips had broken off. No matter. I finally got round to buying the other bits and pieces from the local Ford dealer. Fitted them this evening, and may I say, it was much easier than I had imagined.

What was needed for this upgrade:

Bezel: 6S61 19952BC55MW
6S61 19953BC55MW
Switch: 6S6T 13Z024 DA
Clips: W 700895 S300

The clips slot into the bumper and allow the lamps to be screwed in.

As I already had the lamps I didn't get the part number for them.

Things to note about upgrading fog lights in WQ Fiesta. Unlike the WP, there are already existing connectors just behind the LX bezels, so you don't need to buy any connecting wires. There is also no need for any brackets. The lamps simply sit inside the bumper and are held in by screws (or that's what i did anyway - if you decide to do this you'll see what I mean)

I also installed new bulbs to the main headlights and the fogs as I wanted to match them. I'll have pics up hopefully tomorrow after clean the car up a bit.

More mods coming very soon, hopefully before Small Ford Sunday.
Nice i am just about to do this to my WQ LX and the guys at ford are yet to get back to me... You dont happen to know the Part number for the Fog's do you. (any number on the actual part itself i relise you didnt get them from ford). How did you go with the light switch in dash. Hard to get out? oh and what did it all cost???
Rimwar is offline   Reply With Quote Multi-Quote with this Post
Old 18-01-2008, 05:08 PM   #3
Ben85
Regular Member
 
Ben85's Avatar
 
Join Date: Nov 2007
Location: Liverpool, NSW
Posts: 278
Default

When and where is this small ford sunday?
__________________
2006 WQ Fiesta Zetec Sea Grey

Interior:- MOMO Blue Leather Gear Knob, Window tint, Scuff Plates, ST Black & Blue Leather seats, Soundstream Amp & 5x7 speakers, Sony Headunit, Pioneer sub & Amp.

Under the Hood:- Superchips ECU Flash Tune, Denso Iridium plugs, KV85 Magnecor Leads, BMC CDA Induction.

Exterior:- Spoiler, clear side repeaters, Lowered (35mm) King Springs, Whiteline 22mm Rear sway bar, 2" cat back exhaust with a dual conversion, Konig 17" Hotswap with Kumho Rubber, HID's.
Ben85 is offline   Reply With Quote Multi-Quote with this Post
Old 18-01-2008, 08:34 PM   #4
Fled74
The Thread Killa
 
Fled74's Avatar
 
Join Date: May 2006
Location: Melbourne
Posts: 1,064
Default

Quote:
Originally Posted by Ben85
When and where is this small ford sunday?
The thread for Small Ford Sunday 2008 is HERE, in the EuroFordClub section of the forums. If you'd like to go, put your name down.
__________________



"It is the mark of an educated mind to be able to entertain a thought without accepting it." - Aristotle
Fled74 is offline   Reply With Quote Multi-Quote with this Post
Old 19-01-2008, 01:56 PM   #5
chinw3e
no sacrifice, no victory
 
chinw3e's Avatar
 
Join Date: Oct 2006
Location: Narre Warren
Posts: 119
Default

The lamps I got off ebay for $20 if my memory serves correctly. Very lucky to find them. But since I found them on ebay, I didn't get the part number quoted on my receipt. Just ask the guys at ford, i'm sure they will help you out. But make sure they give you part numbers for the standard fiesta bumper, not the XR4. I'll have a look though, since I have to adjust the height of the lights. All up, I think I ended up spending about $220.

The switch was as easy as pie. Open up the compartment to the lower left of your steering wheel and then stick your hand up there. Just grab the switch from behind, pinch the levers in and push out. Very very simple. If your hands are too big you may be in strife.

Good luck with the install.
__________________
2006 Panther Black Fiesta LX

Eibach Lowering Springs, Wiecher Sports Strut Brace, K&N panel filter, fog lights, crystal black side indicators, car mats, tinted windows
chinw3e is offline   Reply With Quote Multi-Quote with this Post
Old 20-01-2008, 01:53 AM   #6
Rimwar
On 'L' Plates
 
Join Date: Jan 2008
Location: Thornlie Western Australia
Posts: 18
Default

Quote:
Originally Posted by chinw3e
The lamps I got off ebay for $20 if my memory serves correctly. Very lucky to find them. But since I found them on ebay, I didn't get the part number quoted on my receipt. Just ask the guys at ford, i'm sure they will help you out. But make sure they give you part numbers for the standard fiesta bumper, not the XR4. I'll have a look though, since I have to adjust the height of the lights. All up, I think I ended up spending about $220.

The switch was as easy as pie. Open up the compartment to the lower left of your steering wheel and then stick your hand up there. Just grab the switch from behind, pinch the levers in and push out. Very very simple. If your hands are too big you may be in strife.

Good luck with the install.
Cheers will post some pics when i get the job done.

Bargin Fogs.... they will be expensive i bet at ford.
Rimwar is offline   Reply With Quote Multi-Quote with this Post
Old 20-01-2008, 02:02 AM   #7
chinw3e
no sacrifice, no victory
 
chinw3e's Avatar
 
Join Date: Oct 2006
Location: Narre Warren
Posts: 119
Default

Sorry i meant lower right of the steering wheel.

I should post some pics up soon too. Darned rain hasn't let me wash her.
__________________
2006 Panther Black Fiesta LX

Eibach Lowering Springs, Wiecher Sports Strut Brace, K&N panel filter, fog lights, crystal black side indicators, car mats, tinted windows
chinw3e is offline   Reply With Quote Multi-Quote with this Post
Old 20-01-2008, 02:06 AM   #8
Rimwar
On 'L' Plates
 
Join Date: Jan 2008
Location: Thornlie Western Australia
Posts: 18
Default

Quote:
Originally Posted by chinw3e
Sorry i meant lower right of the steering wheel.

I should post some pics up soon too. Darned rain hasn't let me wash her.
Yeah i knew where you ment. Left or right depends on your perspective. cheers.
Rimwar is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 07:24 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL