|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
21-05-2006, 02:07 PM
|
#1 | ||
|
Starter Motor
Join Date: May 2006
Posts: 1
|
Hi guys, does anyone know how I get the inside door panels off to replace the factory speakers in this model of car?
I just got one last week and want to replace the factory speakers, I have already done the head unit which was no major hassle, but I can't seem to work out how to get the side door panel off. I can pull the bottom half out with the clips but it seems to be attached to the top half which won't allow me to get into the speakers. I also undid two of the screws on either side and tried lifting it off but it looks like there is a screw attached from the arm rest which i can't seem to find. any help would be appreciated. |
||
|
|
|
23-05-2006, 03:12 PM
|
#2 | ||
|
Over Thinker
Join Date: Dec 2005
Location: Ipswich Qld
Posts: 1,351
|
can you take a picture of it
i dont know the car it may to have a plastic pop out button or cover over the screw
__________________
My car goes Brumm Brumm |
||
|
|
|
|
21-05-2007, 11:13 AM
|
#3 | ||
|
Regular Member
Join Date: May 2005
Posts: 33
|
i'm probably a year too late but i was doing the exact same thing on the weekend....
You need to pull of the armrest "rubber trim" and you will find 2 additional screws that hold the door trim to the door itself. Took me a while to suss out what was going on. Now onto MY problem... after pulling out the speaker i thought the Laser 2000model speakers were 6"x9", i go and buy a pair of Sony 6"x9" for $57 at JB-HiFi only to find they DONT fit in the door cutout!!!  : Does anyone know what speaker size i should be replacing the standard ones with? Cheers AK
__________________
2009 Egos FG G6E |
||
|
|
|
2000 Ford Laser GLXi speaker installation
Linear Mode
