|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|
Thread Tools | Display Modes |
13-07-2013, 04:22 PM | #1 | ||
Starter Motor
Join Date: Jul 2013
Posts: 5
|
my car is an auto and is idleing about 700 and is very rough, when i put it into drive rpm goes down then stops , i listen to the 4 injectors with a scew driver and its sounds ok i then check each spark plug for spark also ok but if i remove the plug terminal for each injector, 3 out of 4 just about stalls the engine, number one cylinder if i remove electrical plug to injector it makes no difference to the engine rpm and sound , i swapped spark plugs and injector to eliminate problem still numbwer 1 cylinder seems tobe and maybehas no compresson, i dont have a comprresion tester , i have changed the head gasket preaviously after it overheated but is there anyway 1 out of 3 has no compresson unless the rings were blown?
|
||