|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
|
|
Thread Tools | Display Modes |
06-11-2008, 01:58 AM
|
#1 | ||
|
FF.Com.Au Hardcore
Join Date: Jun 2007
Posts: 518
|
The car is a 2000 AU2 XR8... Dealer fitted Noisy Crappy Directional tyres just before i bought the car... Once i got the car home i checked the tyre pressure...which was 45psi all round. Dropped it to 32psi all round and it drove a bit softer, but tyres started to wine..which is annoying..
7,000 kilo`s later i noticed both front tyres were wearing badly on the inner side of the tread.. With the car just clocking 38,000 Kilo`s i woundn`t think there was much suspension wear.. So i went to a suspension & Wheel Alignment shop and was told the alignment was perfect and the wear was due to crapy tyres and low pressure.. He told me to run 40 psi all round which i thought was too high?? With his personal car he runs 50 psi..which was a T3 with a XR front, super lows,18 inch rims running 245`s at the front and 265`s at the rear..450KW at the flywheel,Rotors were so large that he had to machine the inners of the rims to get them to clear.. Caliper`s were massive, No Plate had STABLE 1... The car looked pretty tough,colour was silver.. One Tough car! |
||
|
|
What is the right tyre pressure??
Threaded Mode