![]() |
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 | ||
FF.Com.Au Hardcore
Join Date: Mar 2005
Location: NSW
Posts: 1,802
|
For the AU XR6 gurus out there.......
Does the XR6 1, 2, 3 VCT/IRS sedan run a different t5 to the Hp beam axle car? Ive got a t5z tremec 5 spd gearbox and need to identify if its from a VCT as the tailshaft yoke will not release from the box.I dont want to force it. Or am I not trying hard enough??????? Can anyone confirm if the 2 cars have a differnet t5z?????? and is the output shaft form part if the yoke for the tailshaft???? cheers
__________________
T2 TE50 no:154 Narooma blue AU2 XR8 ute XR4 fiesta |
||
![]() |
![]() ![]() |
![]() |
#2 | ||
rexnet
Join Date: Feb 2010
Location: Adelaide, South Australia
Posts: 3,562
|
my tail shaft yoke into gear box slides in and out really easy :\
VCT car factory manual |
||
![]() |
![]() ![]() |
![]() |
#3 | ||
RIP...
Join Date: Dec 2004
Posts: 15,524
|
The yoke should slide out quite easily.
It's possible a small groove has been worn in the yoke by the extension housing seal (fairly normal), which might be causing it to be slightly firm. Just give it a good yank. As for any differences, the box itself is identical, however the ratios are apparently a little different, with the VCT models having a slightly taller first to third, IE, a closer ratio gear set. Not quite as close as the V8 box though. This is per Ford workshop manuals, whether they were actually like this in the cars is another matter. If it was, a HP box would the pick IMO as first gear is nice and short for good take off.
__________________
. Oval Everywhere... |
||
![]() |
![]() ![]() |
![]() |
#4 | ||
FF.Com.Au Hardcore
Join Date: Mar 2005
Location: NSW
Posts: 1,802
|
thanks guys yeh,I give it a resonable tap with the dolly and hammer and it all came out .
AU HP 4ltr and t5,LSD it should all go alright in my XF.thanks for the help cheers
__________________
T2 TE50 no:154 Narooma blue AU2 XR8 ute XR4 fiesta |
||
![]() |
![]() ![]() |
![]() |
#5 | ||
rexnet
Join Date: Feb 2010
Location: Adelaide, South Australia
Posts: 3,562
|
Didn't know that JC bit disappointed now :/
|
||
![]() |
![]() ![]() |
![]() |
#6 | |||
RIP...
Join Date: Dec 2004
Posts: 15,524
|
Quote:
![]()
__________________
. Oval Everywhere... |
|||
![]() |
![]() ![]() |
![]() |
#7 | |||
rexnet
Join Date: Feb 2010
Location: Adelaide, South Australia
Posts: 3,562
|
Quote:
|
|||
![]() |
![]() ![]() |