|
26-05-2024, 10:01 PM | #1951 | |||
Regular...with metamusal
Join Date: Oct 2009
Location: Geeeloong
Posts: 6,063
|
Quote:
with the plug all you need is the one with the small magnet fitted. i have the factory wagooon wiring/sensors one x3. i tried setting up the factory unit quite a few times. even had it working on 'Ol yella [x-taxi wagooon]. but i could never get it going/working properly on the BA M7 wagooon?. i ended up fitting aftermarket sensors with my own wiring [except for the sensor part] and the trailer part [for which i will eventually throw away the factory 12 pin & replace with a flat 7 pin, with a magnet of course!]. all works great now! .... well did till i blew/contaminated the gearbox cheers Ps. all you need then is the wiring which you can easily get a hold of. and the 12 pin plug which is easy to find here or here. i will be trialling this one or this one as i don't remember what 12 pin i used? [wired up my own edition with a change to the reverse lights as well]. |
|||
This user likes this post: |
27-05-2024, 01:37 PM | #1952 | ||
Starter Motor
Join Date: Sep 2018
Posts: 7
|
Hi GTLEGEND
Was referred to you by other members as you may be able to help 2013 Ford FG EcoLpi MKII LPG We want to order a new oxygen sensor. i have seen some on ebay and other sites but the one they are selling has 4 wires. The one we have is 2 wires. My question is do we need to get a 2 wire sensor or can we use the 4 wire. Does that also mean that the FG has 2 types of sensors a 4 wire and a 2 wire one? Strange Any help would be appreciated |
||
This user likes this post: |
27-05-2024, 05:44 PM | #1953 | |||
FF.Com.Au Hardcore
Join Date: Mar 2013
Posts: 7,533
|
Quote:
Hope that helps, GT |
|||
2 users like this post: |