Quote:
Originally Posted by GTLEGEND
For GTP 6FPAAAJGSW9C69424, catalogue advises it could be one of the below as it does not know if it has traction control or DSC.
BG2140E superseded to LU7Z2140A: MASTER CYLINDER ASSY (TRACTION CONTROL WITH DSC)
or
BG2140F: MASTER CYLINDER ASSY (WITH ANTI-SPIN TRACTION SYSTEM).
For G6E 6FPAAAJGSWBP59809
BG2140E supersedes to LU7Z2140A as above.
So pending on what the GTP has in terms of traction control and DSC, will depend if they are interchangeable.
GT
|
I believe the quickest way to physically tell the difference between the 2 is the size of the nut and pipes coming from the M/C.
For a TC only M/C the front circuit nut is a M10 thread and the pipe is about 1/2 to 2/3 the size of the rear circuit. I've never measured it, but the size difference is noticeable.
For a DSC M/C both nuts are a M12 thread and the pipes are the same size.