Quote:
Originally Posted by lumen8
Here is a listing for a Delphi pump on ebay.
https://www.ebay.com.au/itm/Genuine-...097963927#rwid
Not a difficult job, as you prob know there is info here plus vids on ebay. Make sure fuel level is low before doing it, remove rear seat, remove elec connector, remove fuel lines with the right tool (i blast the connectors with wd-40, they seem to come off easier plus it cleans dirt/dust out) , undo screws, remove pump.
make sure the seal is sitting right when reassembling because the fuel level is higher than the pump on BA's when the tank is filled past a certain point.
|
And don't forget to depressurise the fuel system, or else it could get messy